Drongo's Artillery for Arma 3 version 1.541 by Drongo and friends 3 Nov 2024 Discord for my mods: https://discord.gg/XSRHPEd REQUIREMENTS Arma 3 CBA for Arma 3: https://forums.bohemia.net/forums/topic/168277-cba-community-base-addons-arma-3/ OVERVIEW Drongo's Artillery (DRA) adds semi-realistic artillery, virtual artillery, cruise missiles, suicide drones/loitering munitions, grenade-dropping drones, orbital beam and railgun strikes, C-RAM, Counter Battery radar, Electronic Warfare and satellites to Arma 3. It is based on CoC Unified Artillery for OFP. It puts AI-controlled batteries, virtual batteries and orbital strikes under player control. A degree of skill is both required and rewarded by the system. Users can control sheaf type, sheaf size, round type, angle, fuze, etc. DRA requires some degree of map-reading and the ability to call adjustments. By default, spotters (or their drones) must be within 1000m of the target and have LOS. The rounds are not spawned in, the artillery assets are given target coordinates, calculate the aimpoint based on various factors and fire real shells. The doArtilleryFire command is not used, so it is possible to select both high and low angle fire for most assets. Multiple ammunition types can be used in a single barrage (eg. HE with smoke). BIS and properly configured mod assets are supported (RHS, CUP, Pook's Artillery, Unsung, TIOW and Global Mobilization have been tested). Simply place assets on the map and they will be available to the appropriate side. To access the artillery system, hit your "HOME" key (this can be adjusted under CBA options). A radio is required to access the system. The default radio, ACRE radios, Task Force Arrowhead radios and Unsung radios are all supported by default (others can be added). Vehicles are also assumed to have radios. Each side is partially voiced. Players can select from edited lines from Generation Kill, edited CSAT and AAF voices, and custom voice sets in US English and Yugoslav. Features: - On map artillery with user-controlled angle, sheaf, fuze, rounds, tubes to fire, etc - 10, 8 and 6 digit grid references for any map - Optional requirement for spotter to be within range of the target and have LOS - Virtual artillery - Cruise missiles - Loitering munitions (Mini-Harpy and modified AR-2) - Grenade-dropping drones - Orbital beam and railgun strikes - Surveillance satellites - C-RAM - Counter-battery radar (can target incoming for AD) - EW against drones (and optionally aircraft and incoming artillery) - Blacklist modules - Easily limit access via module - Various voice sets (US English, CSAT, AAF, Yugoslav, Australian English, French) - Compatible with artillery mods - Easy customization with modules - ACE menu integration SUPPORTED UNITS The default BIS artillery assets, CUP, RHS, Pook's artillery, Unsung, TIOW and Global Mobilization have been tested and work with this system. Other mods that are properly configured should work with this system. BASIC USE To access the artillery system, hit your DRA key ("HOME" by default, change under CONFIGURE > CONTROLS > CONFIGURE ADDONS in mission). The player must have either a vanilla (or inherited class), ACRE or TFAR radio. Additionally, any non-civilian vehicle is assumed to have a radio. Opening the system will present the "Assets" menu. Next to each asset is a 3 letter code: RDY - Asset can be controlled and issued orders. CTL - Asset is under control by either the player or someone else. If the player has control, he can issue orders. BSY - Asset is firing/processing a mission. This asset can not be controlled or issued orders. MOVE - Asset is moving. Once an available asset is selected, click on the "Control Asset" button. The player may now enter the X and Y coordinates for the target point and his own (spotter) position. An 8-digit or 10-digit grid reference is used (10 meter and 1 meter accuracy respectively). 8-digit values must be between 0000 and 9999, 10-digit must be between 00000 and 99999. X is the left/right axis on the map, and Y is the up/down axis. Here are some examples of valid 8 and 10 digit values: Map 8 digit 10 digit X Y X Y X Y 023 109 0230 1090 02300 10900 Input: 02301090 Input: 0230010900 To target half-way between 023 and 024, use these values: Map 8 digit 10 digit X Y X Y X Y 023 109 0235 1090 02350 10900 Input: 02351090 Input: 0235010900 Once these are entered, click on "Input". Spotter position must be entered before the target position. The "Control" dialog will appear. Here the player can select the warhead type, angle, etc. Once they are entered, clicking "Transmit" will send the mission to the asset (this will be processed on the server). You can only control a single asset at a time. If you wish to take control of another asset, issue Fire For Effect orders or release the asset using the "Release" button on the assets screen. Note that it can take a long time between calling for fire and rounds actually arriving. This time can be set in the Options module. POLAR MISSIONS Polar missions are calculated based on the spotter's position. The input format is ddd/rrrr where ddd is the direction (0-359) and rrrr is the distance from the spotter's position. For example, 45,500 would target 500 meters to the player's north east. MISSION TYPES Fire For Effect (FFE): Fire all tubes in the battery at the target. Each tube will fire the number or rounds set by the player. Spot: Fire a single marker round from one tube to allow adjustment of fire. When the rounds are on target, call FFE. Plot: Plot a fire mission but do not fire any shells. This mission can later be fired at a time selected by the player. As it has already been plotted, the response time will be faster. SHEAFS POINT: The firing assets try to fire on the target point with no dispersion. CIRC: A circular sheaf of the size designated in X of Sheaf Size (Y has no effect). BOX: Square or rectangular, as determined by the X (width) and Y (depth) values of Sheaf Size. ANGLE Low angle is generally when the firing tube has its barrel depressed below 45 degrees. Low angle missions take less time to travel to the target. However, they are also more likely to impact with intervening hills. High angle is generally when the firing tube has its barrel elevated above 45 degrees. High angle missions will take significantly more time to reach the target. However, such missions will not be blocked by mountains, etc. Note that mortars are only capable of high angle missions. FUSE Most assets can only use IMPACT fuses. If configured with submunitions, they will be able to use AIRBURST, though the minimum distance is limited by the config value. Vanilla assets can use IMPACT, DELAYED, AIRBURST and AIR/DEL. IMPACT: Shells explode on impact. DELAYED: Shells penetrate most structures before exploding inside. AIRBURST: Shells explode in air (good for troops in cover). AIR/DEL: Half of the tubes will fire DELAYED (IMPACT if not capable of delayed), half will fire AIRBURST. Airburst effectiveness depends on the HIT config value of the shell. TUBES By default, for FFE, all tubes in a battery will fire. By entering numbers seperated by commas, only selected tubes will fire. For example, in a 4 tube, to make only the first and third tubes fire, use this value: 1,3 ROUNDS This determines how many rounds each gun will fire. If a Spot mission is fired, only a single round will fire, regardless of this value. INTERVAL The time between volleys of fire. ROLLING BARRAGE Each volley will reposition the selected sheaf by the direction and distance specified. The direction is the raw value in degrees (ie. 0 for north, 90 for east, etc). The distance is in meters. For example, to shift the sheaf east by 100 meters after each volley, use this value: 90,100 PRE-PLOTTED/REPEAT MISSIONS In the Assets dialog, there is a window of previous FFE and Plot missions. Selecting one of these and clicking the Control button allows the player to re-issue the order. The response time will be much faster compared to transmitting a new mission. However, it is not possible to issue new x and y coordinates (though sending adjustments is possible). ADJUSTING FIRE It is likely that the first round will be off target. The greater the range from the battery to the target, the higher the potential deviation. The spotter can issue adjustments and call for further spotting rounds before using Fire For Effect. NOTE: The adjustments left/right and up/down are relative to the spotter (not the battery). Left/Right: A negative value shifts to the left, a positive one to the right. Add/Drop: A positive value adds distance (ie. increases the range from the player). A negative value drops distance (ie. decreases the range to the player). After entering the adjustments, it is essential to click the "Adjust" button before hitting "Transmit". MAP GRIDS For manual input, players can use 6, 8 or 10 digit grids. Click on the grid text to toggle this. Additionally, clicking Tablet>F5 will display numbers and a grid on the map to assist targeting. The colour of this information can be toggled with Tablet>F6. BINOCULAR TARGETING There is an option to allow target input with binoculars. Center the target in the binoculars, then press space. This will register the spotter and target position. Then click the Target button in the Assets dialog to start plotting the firemission. RESTRICTING USERS Users can be restricted by using the Restrict Users module. Sync units to allow that unit type, and set the minimum rank in the module. Alternatively, use the Whitelist Users module. This will block all clients except those synced to the module. A user can be guaranteed access (as long as they have a radio) with the following code: _user setVariable["draWhitelisted",TRUE,TRUE]; Or with the following code on their client: draWhitelisted=TRUE; Everyone can be whitelisted with: draWhitelisted=TRUE; publicVariable"draWhitelisted"; To restrict users from drones, cruise missiles or radar/C-RAM/satellites, set the appropriate field to TRUE in the Options module. Then whitelist the desired user with the following code: _user setVariable["draAccessDrones",TRUE,TRUE]; _user setVariable["draAccessCruise",TRUE,TRUE]; _user setVariable["draAccessSensors",TRUE,TRUE]; EXCLUDING FROM THE SYSTEM To exclude a unit or group from being recognized by this system, sync it to an Exclude module. NON-RECOGNISED ASSETS If a 3rd-party asset is not being recognised, sync a single type of that vehicle to the Options module. AUDIO By default, BLUFOR plays US English audio files, INDEP plays Greek English and REDFOR plays Persian. "US" will use audio taken from the TV show Generation Kill, "IRAN" uses edited files from Arma 3 for the Iranian side and "AAF" uses edited files from Arma 3 for the Greek side. "NULL" will have no voices, but text messages and radio beeps will still play. The voices used by each faction can be set in the Options module. In addition, there are voice-sets by community members for: US English (by Viper1Zero) Yugoslav (by VedKay) Australian English (by VedKay) French (by Nidroneb) These voice sets were mixed by Fuzzle. BEAM STRIKES/RAILGUN STRIKES Place a Beam Strike module and edit the module fields. The beam strike will appear in the assets list. Asset availability can be changed with: MODULE_NAME setVariable["draAvailable",TRUE,TRUE]; VIRTUAL ASSETS Place a Virtual Asset module and edit the module fields. The virtual asset will appear in the assets list. By default, virtual strikes spawn "Sh_155mm_AMOS" rounds, this can be changed in the Ammo array field. If more than one type of ammo is entered, each shot will randomly select one of the entered types. If the Range field is greater than 0, then the strikes will not be available at ranges further than this value (measured from the module position). Asset availability can be changed with: MODULE_NAME setVariable["draAvailable",TRUE,TRUE]; LOITERING MUNITIONS (Tablet>F2) These "suicide drones" can be used as drones. To manually attack with them, use the drone's gunner position to lase and lock the desired target. Then press spacebar. The drone will automatically guide to the target. To abort an attack, press spacebar again. Note that attacks can not be aborted in the terminal phase. Alternatively, the drone can be set to Automatic. It will attack the first target it locates that matches the selected criteria. The types of suicide drone are: AR-2X: Based on the AR-2 Darter. Available for NATO, CSAT and AAF. Can be deployed from backpacks. MiniHarpy: Can be launched from M5 Sandstorm variants. CRUISE MISSILES (Tablet>F3) The Mk41 VLS, Mk41B VLS and Pook's BGM-109 and 3K60 Bal can be fired as cruise missiles. They first require waypoints to be entered. Select the launcher, click the map to place waypoints (the final waypoint will be the impact point), then click "Launch" in the dialog. C-RAM/EW (Tablet>F4) Under NATO>Turrets there is a Pretorian 1D C-RAM turret will engage incoming shells, rockets or missiles within 2000m (or the value set in the Options module). EW vehicles can be created by syncing a crewed vehicle to a [DRA] EW vehicle module. Double clicking on assets will toggle them on/off. RADAR (Tablet>F4) Under NATO/CSAT>Turrets there is a counter-battery radar. It will detect shells, rockets or missiles within range that are above 10m. If the player has turned on alerts (Tablet>F4), these shells will be marked on the map. The range can be set in the options module. The radar will also estimate the position of the system that fired the round and mark it on the map with an orange marker (the markers will disappear after 2 minutes). Additionally, the radar will designate incoming shells for friendly air-defence assets. By default, incoming shells within 5000m can be engaged. Shells first detected at less than 500m will be ignored (to prevent engaging outgoing fire). Any assets that are synchonized with the radar will use improved targeting scripts, though un-synchronized assets in range will still likely engage. Effectiveness in destroying incoming shells: MIM-145 Defender: Very poor Mk21 Centurion: Very good Mk49 Spartan: Terrible IFV-6a Cheetah: Very good Praetorian-1C: Very good ZSU-39 Tigris: Very good S750 Rhea: Terrible The default detection range and air-defence range of a given radar can be changed with this code: _radar setVariable["draRadarRange",(range in meters),TRUE]; _radar setVariable["draRadarRangeMin",(range in meters),TRUE]; _radar setVariable["draADrange",(range in meters),TRUE]; SATELLITES (Tablet>F4) In-game, satellites function as static invisible observation drones. Place a module at the desired location and specify the desired height. Players can connect via a UAV tablet. To reposition a satellite, double click on it and select a new map location. Satellites have limited fuel for changing position. ELECTRONIC WARFARE Any crewed vehicle can be designated an EW vehicle by syncing it to a DRA_EWvehicle module and setting the paramaters. The EW vehicle will attack any drone (and optionally aircraft) that is known to the vehicle and in LOS. A successful attack against a drone will cause it to crash. A successful attack against an aircraft will damage its avionics for a period of time deactivate sensors and cause targets to be lost. To increase the effectiveness of an EW vehicle, sync it to a radar unit and enable datalink. EW vehicles can also simulate the Russian ability to trigger the fuses on incoming artillery rounds. As there are not many EW vehicles in Arma, you can create one yourself using the attachTo command. In the editor, find a suitable antenna and place it on your vehicle. Call your vehicle ew1 and the antenna a1. Put the folloing code in the vehicle init: a1 attachTo[ew1]; GRENADE-DROPPING DRONES Assemble an AR-2G. Stand next to the assembled drone and drop a grenade item from your inventory. Use the Attach/Detach Grenade action on the drone. Then fly the drone to the target. In the gunner camera view, use the arrow keys to finesse aiming. Press space to drop the grenade. At minimum and medium zoom, the drone's velocity will be adjusted in the desired direction. At maximum zoom, setPosATL is used to allow better accuracy. BLACKLIST AREA This module will prevent calling in strikes within the specified radius. MODULES There are various useful modules under Module>Drongo's Artillery. DRA_Options DRA_RestrictUsers DRA_Blacklist DRA_Exclude DRA_VirtualAsset DRA_BeamStrike DRA_RailgunStrike DRA_EWvehicle DRA_Satellite DIAGNOSTICS Clicking the Diagnostics button on the lower right hand side of the dialog will display a hint with a variety of information regarding the status of the system. This is mainly for debug purposes. COUNTER BATTERY If a side has an artillery radar and a Counter Battery module, it will backtrack shells from enemy guns within radar range and fire at their position. AI DRONE STRIKES With this module, AI groups on the set side will attempt to use AR-2X and RC-40 drones possessed by the group to attack enemies. If the target is a vehicle, they will report it to MiniHarpy launchers to attack. MiniHarpy and AR-2X drones will only attack vehicles. RC-40s will only attack dismounts. MISC There is a module under Module>Drongo's Artillery to allow tweaking the system. Mortars will respond faster than heavier assets. Do not mix different types of artillery asset in one group. Do not put batteries under human control. RHS M119 and D30 guns behave slightly differently due config issues. Their shells are guided by script in the terminal phase. MIXED MISSIONS As of version 1.45, each tube in a battery can be given unique rounds and fuses in the same mission. Select the warhead and fuse, then click "Set Tube". If this is not done for each tube, those that have not been set will inherit the settings of the selected tube when XMIT is clicked. Note that when repeating a mission from the previous missions list, each tube will need to be set again. CLASS NAMES AAF vehicles: I_MBT_01_arty_F DRA_truck_H_I DPICM MLRS: DRA_MLRS_B DRA_MLRS_O AAF groups: HAF_SPGSection_Scorcher HAF_SPGPlatoon_Scorcher DRA_Radar_01_F DRA_CRAM_01 DRA_UAV_01_B DRA_UAV_01_O DRA_UAV_01_I DRA_SuicideDrone_01_backpack_B DRA_SuicideDrone_01_backpack_O DRA_SuicideDrone_01_backpack_I DRA_MiniHarpy_LM_B DRA_MiniHarpy_LM_O DRA_MiniHarpy_LM_I INCOMPATIBLE UNITS The following units are currently incompatible for reasons beyond my control: "pook_A222_BLUFOR", // won't aim up, works for OPFOR "pook_A222_INDFOR", // won't aim up, works for OPFOR "pook_BGM109_VLS", // Tomahawk, uses cruise missile code, not arty "pook_3K60_BLUFOR", // BAL, won't aim up, works for other sides "pook_MZKT_AMMO_BLUFOR", // ammo bearer "pook_MZKT_AMMO_INDFOR", // ammo bearer "pook_CAESAR_INDFOR", // BLUFOR works, but INDEP doesn't "pook_1B75_INDFOR", // arty radar "pook_1B75_OPFOR", "pook_1L220UK_INDFOR", // arty radar "pook_9K52_BLUFOR", // FROG7, BLUFOR/OPFOR isn't working for some reason, INDEP works though "pook_9K52_OPFOR", "pook_4K51_BLUFOR", // Rubezh, probably needs special code "pook_4K51_INDFOR", "pook_4K51_OPFOR" I will attempt to remedy this in a future patch. KNOWN BUGS Mini Harpy drones can destabilize and crash if time acceleration is used. The transition to attack can be janky for suicide drones, this will be fixed in a future patch. Setting large values for C-RAM and radar can affect performance. Cluster cruise missiles are unreliable in MP. FUTURE PLANS Long-range loitering munition based on the Ababil-3. Airburst ability to modded artillery. Completely fix Mini Harpy stability issues. Uploading new waypoint sets to cruise missiles in flight. CREDITS CoC: Unified Artillery for OFP, the system this is based upon YonV: Heaps of testing and very helpful input Drongo: Development and scripting Chops: Airburst/delay fuse code, MiniHarpy model and config, testing, design help James: Testing, design help Zodd: Testing D.Smithy: Real-world artillery knowledge, testing Rydygier: Box sheaf script Kawa: Localization code, French localization TheTimidShade: Beam strike scripts (see more if his work here: https://steamcommunity.com/id/TheTimidShade/myworkshopfiles/?appid=107410) Viper1Zero: US voice set https://www.youtube.com/c/Viper1Zero/videos Red Dog: Testing gsg94490: Testing Fuzzle: Audio mixing for the voice sets VedKay: Yugoslav and Australian voice sets, testing, graphics, missions and a lot of other stuff Nidroneb: French voice set Mildly_Interested: A lot of testing and feedback Rimmy: Australian voiceset Digby: Imperial Guard voiceset Mundy: Testing A huge thanks to my Patrons and supporters: Ahmad Fadhil Mohamed Alexander Isaksson Norum Alex Lacy Andreas Nilson Ave Sum Azza B. Hinton Beags and Jam Ben_at_Arms Berl Ancell Bretto1945 Bret Bothelio Bruno Roberto Corrêa Bullrich von Salz Cedric Oliver Chris Hall Daniel Selby David Catley David Husa David Kudýn DavidSköld Declan Emery Desmond Abrams Doctor Elliot Taylor EO Fearmonger Fetus114 Ferdinand Frédérick Milhomme Frosties Gary Jackson Gordon gsg94490 Haakon Longbeard Hogosha Ian Schonely Its_the_Jonah James Hill James tribbles Jason Dotson Jason Kieft Jayrad Jessica Ferguson JimmyJamJams Jonathan Harris Karol Zaczek Kelvin P Kenneth Kilvington Kevin Kelly Logan Scott LONEWOLF352 Longbeard Marshall Bouldin Matt Henderson Magoo MoonGuy Nam Nicholas Auger Nicholas Odgers Nick Gregory Ole Petter Johnsen Owen Siegfried Paramarine Task Force Paul T Pernox PHILLIP HARRIS Proxno Pusu npt Ryan Rolly uk Roman Martinez Sean Martin sebastiaan reedijk SETH BARCELLO Sly Slav_Man_Shae Sonny Hermansen Stuart Burling swagggenius Terrance The One on the Rock Timothy Hill Tim O’Ceallaigh Totem tunou xiong VedKay ViperBAT46 DTF46 Wulf WW3andMe YonV Zakuaz Thanks also to the guys who post encouragement, bug reports and suggestions. THEFT OF MY WORK My artillery mod was stolen, edited and re-released in violation of the license by BlackAlpha of tier1ops.eu. Here is a video showing my original work and his stolen edit: https://www.youtube.com/watch?v=Oe7G6WwxQVU Please share this video and let the community know that BlackAlpha and tier1ops.eu are thieves. CONTACT Check my YouTube channel for trailers, WIP etc: https://www.youtube.com/channel/UCrZtKPYPS9iYzu1EAzTLYgg I am not on the BIS forums. I can be emailed at drongomods@gmail.com. LICENSE You must receive my permission to use any of the scripts, configs, concepts or designs of this addon in the development of other projects. You may not distribute altered versions of this addon. You may not use this addon or any derivatives thereof in any way for monetary gain. You may not use this addon or any derivatives thereof as part of any submission to any contest of any kind. You may not port this addon to any other game (it may ONLY be used with Arma 3). You may not use this addon with VBS, VBS2, VBS3 or any similar product. You may not re-upload to Steam. This addon may not be used for any commercial purpose. This addon may not be used for training purposes. This addon may not be used as a tool by military, law enforcement or security groups/individuals. If you need an exception, contact me. CHANGELOG v1.541: Removed: Use of CBA invisible targets v1.54: Issues with AI deploying drones v1.53 Added: Module to allow AI to call counter-battery missions Added: Module so AI can use suicide drones (MiniHarpy, AR2X, RC40 from Reaction Forces CDLC) Fixed: Invisible targets attached by artillery radar were sometimes destroying rockets Fixed: INDFOR artillery radar was not working Changed: Vanilla 155mm and MLRS systems will now be more effective against AFVs v1.52 Fixed: AD radar dummies were not being deleted Fixed: MiniHarpy launcher losing EH after ending a mission v1.51 Added: New airburst system Added: Artillery radar can now target incoming for AD Changed: Aiming sensitivity of grenade-drones Fixed: Several minor issues v1.5 Added: Grenade-dropping drones Fixed: Assets over water were not firing v1.49 Fixed: Issue with Options module and older missions v1.48 Added: Counter-battery radar now estimates position of firing system Improved: Counter-battery radar is better optimized Changes: Requirements for spotter range/LOS disabled by default v1.47 Added: Requirement for spotter to be within range of the target (range can be configured in the options module) Added: Requirement for spotter to have LOS to the target (can be turned off in the options module) v1.46 Added: Code to reset RHS guns when they get stuck Fixed: Several minor script issues v1.45 hotfix Fixed: Issues related to set tube v1.45 Improved: MiniHarpy launch reliability Removed: MIXED fuse Added: Each tube can now be given separate ammo/fuse settings v1.44 Fixed: Numerous issues with Pook's Artillery v1.43 Fixed: Excluding sensor access did not work v1.42 Added: EW vehicles can trigger the fuses on incoming artillery rounds (effectively functioning as a C-RAM) Added: EW vehicles can now be managed under the C-RAM menu Changed: Reduced speed for guided and laser-guided shells in their terminal phase v1.41 Added: Immediate suppression option Added: Immediate suppression (smoke) option v1.4 Fixed: Diagnostics option not showing if other Drongo mods loaded v1.138 Fixed: MiniHarpy launches beyond first didn't create the munition Fixed: INDEP satellites spawned on BLUFOR v1.137 Fixed: Drongo's Artillery will only show up in the ACE menu if the player has access Improved: Reliability of MiniHarpy launch v1.136 Changed: ACE menu integration only happens if the unit has artillery access at mission start Fixed: Errors with plotting virtual asset missions v1.135 Added: Zamak MiniHarpy launcher to AAF Added: M5 MiniHarpy launcher to CSAT Improved: MiniHarpy flight stability Removed: M5 MLRS from AAF v1.134 Fixed: Bug with backpack radios v1.133 Added: Unique key v1.132 Added: Support for GM artillery Improved: Gun angle detection code v1.131 Added: Module option to disable ACE menu integration v1.13 Added: ACE menu integration Changed: MiniHarpy launcher can launch in volleys v1.12 Fixed: EW vehicles stopped working once no crew were present v1.11 Fixed: EW vehicle module giving script error v1.1 Added: CSLA radio classes Fixed: RHS 9P129s were staying BSY after deploying v1.09 Fixed: REDFOR and INDFOR cruise missile drones were not spawning after launch v1.08 Added: Icons for MiniHarpy Improved: MiniHarpy model Improved: MiniHarpy flight stability Improved: MiniHarpy attack code Fixed: Cruise missiles and MiniHarpy drone objects sometimes collided with ammunition objects upon launch Fixed: Backpack radios not being detected Fixed: Could not cycle through tubes in the plot menu v1.073 Fixed: MiniHarpy failing to launch v1.072 Added: Check to further address the "stuck camera" bug v1.071 Added: Dialog exit key will now also reset player view Changed: Dramatically reduced radar cross section of MiniHarpy Changed: MiniHarpy killed EH now has a sleep to attempt to prevent the "stuck camera" bug v1.07 Added: Support for ACE DAGR/MicroDAGR and designator/rangefinders Changed: Huge buff to MiniHarpy damage Fixed: HC issue v1.061 Fixed: MiniHarpy issue v1.06 Fixed: Orbital and virtual assets were not showing up for Independent v1.05 Added: Option to input target coordinates with binoculars Added: Improved cruise missiles Added: Imperial Guard voice set Changed: Buffed loitering munition damage Changed: Excluded arty from dynamic simulation and DMP caching Fixed: A bug that sometimes prevented loitering munition warheads from exploding Fixed: Module settings were not affecting railgun/beam kill/damage radius Fixed: C-RAM alarm not playing in MP Improved: Gun on target code Improved: Accuracy of interval code v1.04 Added: Loitering munitions (manual and automatic engagement) Added: Orbital beam and railgun strikes Added: C-RAM Added: Cruise missiles Added: Surveillance satellites Added: Electronic warfare against drones (and optionally aircraft) Added: Counter-battery radar with alerts and shell tracking Added: Virtual assets (module based) Added: Dialogs for C-RAM, radar, satellite and loitering munition management Added: Delayed fuse, improved airburst Added: Rolling barrages Added: "Move" order Added: Restrict Users module Added: New voice sets (US English, Yugoslav, Australian English, French) Added: Blacklist module Added: AI control for suicide drones Added: A huge range of QOL improvements Fixed: Various issues Improved: Mod compatibility v1.03 Fixed: CBA keybind problems. Note: open the dialog once after changing the bind to save it. Changed: When using rounds with long thrust time (eg. some rockets) doArtilleryFire will be used. Changed: Artillery pieces will turn to face their rough target point before processing the mission (thanks Ryan) v1.021 Added: Interval between rounds v1.02 Fixed: Error when selecting next tube v1.01 Hotfix for compatibility with DCE v1.0 Public release Complete rewrite and overhaul of the code Changed: Combined Assets and Aimpoint dialog Changed: Replaced scripted airburst with shells configured for airburst Changed: Options are now set in a single module Improved: Shell guidance Removed: Artificial inaccuracy Added: Module option to disable VCOM for arty groups Improved: Generic profile (for non-vanilla assets) Added: "Assisted" mode (setVelocity) to deal with recalcitrant artillery pieces that won't fire on target Fixed: Illumination rounds Fixed: Debug mode by default Fixed: Force Release not working Fixed: Mark shells on by default Fixed: Assets never lost BSY status Fixed: Grid reference error Added: Choice between 8 digit or 10 digit grid reference Added: Assisted Accuracy to rectify inaccurate BIS rocket artillery Added: Module Option to apply Assisted Accuracy to all assets Fixed: CUP M1129 allowed low angle Fixed: CBA key required rebinding every mission v??? Unknown v0.38 Increased possible range for polar missions to 10,000 v0.37 Added polar missions Adjusted aimpoint UI v0.36 Reworked the profile for rocket artillery due to BIS changing the muzzle modes Re-added Low Angle to rocket artillery Dramatic increase in rocket artillery range Support for the new AAF MLRS v0.35 Fixed bug with adjusting fire (was multiplying dtaXspotter twice) Automatic inputting of the spotter's position is now turned off (mapclick will automatically input it though) Cosmetic dialog changes v0.34 DPICM rounds for the vanilla howitzers and MLRS Versions of the MLRS with DPICM loaded by default Shell cam v0.33 (secret handshake edition) It is a mystery v0.32 Unknown v0.301 Fixed a problem with OPFOR assets not showing up in the system v0.30 Allowed control over each individual tube in a battery Redesigned dialog Added code to prevent some of the "drifting rounds" bug (big thanks to MaHuJa and BlackAlpha of tier1ops.eu) Made the system automatically detect most (all?) 3rd party artillery units Removed most of the hard-coded unit detection code Added distance and gun-target line to the dialog Added ability to exclude groups using the array dtaExclude (add group, leader vehicle or leader vehicle classname) Removed doArtilleryFire commands for preloading ammo as this command is still hopelessly broken Added a new module called "Track Rounds" to help with testing Changed locality check for firing from server to whereever the asset is local Redisgned the repeat mission system so only a single dialog is used Reduced report spam Added elevation of target and selected asset to the main dialog Added dta_fnc_PlaceMarker for testing purposes Fixed a bug in Tube.sqf that prevented sheafs from working properly Dramatically increased the speed of MLRS firing Added an M4 Scorcher to the AAF Added an M5 MLRS to the AAF Added M4 Platoon, M4 Section and M5 Section to the AAF Changed cfgPatches entry from dta to DrongosArtillery (may require deleting the addOns[] and addOnsAuto[] entry from mission.sqm files to update missions) Added debug markers for adjusting fire when dtaDebug is true Tweaked the adjust code a little (seems to be working reliably now) Brought back the XMIT button v0.291 Hotfix to fix bug with audio v0.29 Fixed airburst not working Fixed menu selections not saving Made it possible to restrict users by class and/or unit Added the ability to set which audio is used for each side Reduced the default time to process the first round of a firemission from 60 + (random 30) to 30 + (random 30) Improved initial loading time Tweaked mixed impact/airburst to alternate by odd and even numbered tubes in a battery Added support for Reyhard's M119 (don't know where it went the first time) v0.28 Partial French localization (all done by Kawa) Added support for Reyhard's M119 (thanks to K4ble for reminding me to add this) Added an option to use mapclick to input coordinates (can be disabled with a module) Removed the "Elevation" option from the dialog as it does not work Added support for weapons that inherit from Reyhard's Static Weapons v0.27 Added support for Reyhard's Static Weapons (thanks to Kawa for getting me off my backside to do this) Implemented CBA_fnc_registerKeybind functionality so users can bind their own key (thanks to JCae2798 for letting me know this was possible) Removed double-clicking a radio to open the dialog v0.26 Fixed TFAR compatibility Increased mortar and howitzer HE shell lethality to attempt to match real-world values (may do too much damage against non-personnel targets now) Tweaked configs to change the dispersion of BIS shells to almost zero v0.25 Made tube detection less reliant on the display name (which causes errors with non-English versions) Fixed dialog errors (listScrollBar, colorFocused, colorBackGroundFocused not defined) v0.24 Added a check to \Dialog\Transmit.sqf to prevent a battery from being given multiple fire missions at the same time (possible cause of the "drifting rounds" bug) v0.23 Aimed at fixing rounds drifting far off target with the following means: Added debug chat to check the angle and elevation of turrets on firing tubes Added debug text to round markers reporting the angle of the tube that fired them Added disableAI "TARGET" to \Control\Tube.sqf to stop "drifting" rounds Added disableAI "AUTOTARGET" to \Control\Tube.sqf to stop "drifting" rounds Added enableAI "TARGET" to \Control\Tube.sqf after the tube is finished firing Added enableAI "AUTOTARGET" to \Control\Tube.sqf after the tube is finished firing Increased delay between rounds for 82mm and 155mm v0.22 Added dta_fnc_HasRadio to check if the player has a radio Fixed a bug with \Misc\CommsPlay.sqf not detecting player radio v0.21 Added support for dedicated servers (hopefully) Added support for TFAR (hopefully) Tried to add support for ACRE v0.2 Changed to an 8 digit grid reference Stopped the MTO message for all except the first round (side chat will still appear for FFE) Added a return to assets button to the aimpoint and control dialogs Last dialog is now remembered Added and End Of Mission button which releases the asset and closes the dialog FFE no longer automatically releases the asset (must manually select End Of Mission) PLOT no longer automatically releases the asset (must manually select End Of Mission) Adjusted MLRS fire speed Adjusted time between mortar rounds to 10 seconds (was 5) Changed the way "rounds complete" is called (was using an estimate of time, now called by the asset itself when the final round is fired) Added a help button to the aimpoint dialog Added a dedicated key to access the dialogs (Windows app key by default, change in the userconfig file)